Page 1 of 1

Wiring 2 George L E-66's/3-way switch/1 Vol./1 tone ????

Posted: Tue Feb 01, 2011 11:57 am
by railkat
Hi Folks,

I have a double neck console steel that i'm trying to correct some wiring issues on. I'm wondering if anyone has a schematic or an idea of the correct way to wire 2 E66's, a 3 way switch(on-off-on), and 1 volume pot and 1 tone pot (mine has the capicitor). I have kind of exhausted my google searches for information on this. Thanks for any insights or tips you can share.

Aaron

Re: Wiring 2 George L E-66's/3-way switch/1 Vol./1 tone ????

Posted: Tue Feb 01, 2011 4:42 pm
by richard37066
Aaron -

Covering your bases with a post on the SGF?

There's a ton of stuff on the 'net. Just gotta know what to look for. Since this is up my alley I'll find ya one which won't be confusing - unless someone on the SGF beats me to it!

Please describe your three-way switch. Slide switch? Toggle? Lever?

Get back to me.

Richard

Re: Wiring 2 George L E-66's/3-way switch/1 Vol./1 tone ????

Posted: Wed Feb 02, 2011 1:49 am
by Pat Comeau
Is it a single or double pole the switch? :roll:

:)

Re: Wiring 2 George L E-66's/3-way switch/1 Vol./1 tone ????

Posted: Wed Feb 02, 2011 6:24 am
by railkat
it's a double-pole 3-way toggle switch. thanks.

Re: Wiring 2 George L E-66's/3-way switch/1 Vol./1 tone ????

Posted: Wed Feb 02, 2011 12:35 pm
by richard37066
Aaron -

Found a bunch of diagrams on the web which would work but thought that you might get confused. Made up a cheapy diagram of my own. Hope that I can attach it.

Notes: - The drawing of the potentiometer is from the FRONT - where the knob goes. Reference this to the drawing. You should be able to determine the connections on the jack. The wiper of the volume pot goes straight to the tip connection of the jack.

Let's see if I can attach the drawing.

Richard
PU Wiring Diagram 001-2.jpg
PU Wiring Diagram 001-2.jpg (50.71 KiB) Viewed 3026 times
Man - it sho 'nuff is BIG! Better than nothing.

Hope this helps.