I'm having a bit of difficulty setting up.
1.) For now my pedal travel is stopped by the table top - no problem this I can rectify later.
2.) Strings 4 and 8: Pedal 2 raises both A's to B's so far so good.
3.) Pedal 2 raises string 1 from a G to a G# and Lowers string 5 to an F#. Here's where I'm having problems.
I can get the G# balanced to within 8 cents and the G to within 8 cents. I don't think my pedal rod is too short, but, I may need helper springs and if so where do I put them. The lower has a spring already but the raise does not. I hope I've explained the problem. If you have questions please ask away.
I'll be grateful for any help I can get.
Setting Up A Pull Release - C6
Setting Up A Pull Release - C6
Music is what feelings sound like!
Eldon
Eldon
Re: Setting Up A Pull Release - C6
Sorry I forgot to mention that my changer fingers are a Marlen style with lowers on the left hand side and raises on the right.
If you need photos I'll post.
If you need photos I'll post.
Music is what feelings sound like!
Eldon
Eldon
- Georg
- Posts: 457
- Joined: Tue Nov 03, 2009 10:38 am
- Location: Mandal, VA, Norway & Weeki Wachee, FL, USA
- Contact:
Re: Setting Up A Pull Release - C6
Have you found a solution?
Re: Setting Up A Pull Release - C6
I did Georg thank you much for asking. I'll be posting pics sometime ( enjoying summer & chasing grand -daughter around - not much time for much extra right now) including my truss rods (just a teaser). Solid little guitar stays in tune well bright clean sound lots of sustain, I love it. Showed it to my mentor last night & he agrees.
Music is what feelings sound like!
Eldon
Eldon
- Georg
- Posts: 457
- Joined: Tue Nov 03, 2009 10:38 am
- Location: Mandal, VA, Norway & Weeki Wachee, FL, USA
- Contact:
Re: Setting Up A Pull Release - C6
Good.
Enjoy the summer
Enjoy the summer