My pedal steel No 2
- sheffield steel
- Posts: 188
- Joined: Mon May 10, 2010 9:24 am
- Location: Southampton, UK
Re: My pedal steel No 2
Looking SWEEEEEEEET!!!!!! Ron my friend, keep up the good work.
Dave.
Dave.
Sheffield D10 9+8, Bradshaw WEBB 614-E, Sheffield stainless steel tone bars, Hilton electronic volume pedal, Pro-Fex 2, BOSS DD3
Re: My pedal steel No 2
Thanks everyone.
Ron Mc
Ron Mc
Re: My pedal steel No 2
Hello Maxi what is the dimension of your finger changer?
Steve B.
Steve B.
Re: My pedal steel No 2
Hi Steve, if you mean the overall dim's of a finger, it's 130mm x 20mm x 6.5mm. The finger block is 108 x 40 x 20 with 6.5 wide slots with a spacing off 2mm walls between each slot.
Regards Ron Mc
Regards Ron Mc
Re: My pedal steel No 2 question from Steve
Hello maxi19 sorry to get off the subject of pedal changers, but I have veneered my steel guitar, my issue is when I get ready to put finish on the guitar I have a line to try to make smooth looking and that is where the top veneer meets with the front veneer, how do I keep this edge line from showing thru stain? Steve B.
Re: My pedal steel No 2
Hello Steve,
I don't use veneer but if I did I would use an aluminium angle section for the edging, it can be obtained in 9.5 mm x 9.5 mm x 1.6 mm which is 3/8" x 3/8" x 1/16" which looks neat when polished.
Best Regards
Ron Mc
I don't use veneer but if I did I would use an aluminium angle section for the edging, it can be obtained in 9.5 mm x 9.5 mm x 1.6 mm which is 3/8" x 3/8" x 1/16" which looks neat when polished.
Best Regards
Ron Mc
Re: My pedal steel No 2
Hey Maxi19 what is the shaft holes distance and what is the length of your front and back rails? Steve B.
Re: My pedal steel No 2
30mm between centres, and you would have to make the rails to your own specs depending on your planned cabinet size.
Re: My pedal steel No 2
Steel assembled, just the laborious 'setting up' to do, a job I find involves going round and round in ever decreasing circles.
Best Regards to all.
Best Regards to all.
- Attachments
-
- tn_DSCF1366.JPG (102.59 KiB) Viewed 1480 times
-
- tn_DSCF1364.JPG (90.73 KiB) Viewed 1480 times
-
- tn_DSCF1363.JPG (93.25 KiB) Viewed 1480 times
Re: My pedal steel No 2
2 more shots
- Attachments
-
- tn_DSCF1367.JPG (105.49 KiB) Viewed 1480 times
-
- tn_DSCF1365.JPG (92.24 KiB) Viewed 1480 times