A few more pics of my new 8 string C6
A few more pics of my new 8 string C6
At long last.
- Attachments
-
- P9090925.JPG (101.57 KiB) Viewed 5935 times
-
- P9090918.JPG (88.99 KiB) Viewed 5935 times
-
- P9090918.JPG (88.99 KiB) Viewed 5935 times
Music is what feelings sound like!
Eldon
Eldon
Re: A few more pics of my new 8 string C6
Eldon,
I'm curious to see how you have the stops on the lower/raises. I remember how Sho-Bud did it, I put together a couple of pull release guitars with that type system.
Bill
I'm curious to see how you have the stops on the lower/raises. I remember how Sho-Bud did it, I put together a couple of pull release guitars with that type system.
Bill
Bill Ford
Steeling For Jesus now
S12,CLR..S12MSA"The Universal" both Ext,E9..misc amps and toys.
Steeling For Jesus now
S12,CLR..S12MSA"The Universal" both Ext,E9..misc amps and toys.
Re: A few more pics of my new 8 string C6
If I understand what you,re asking Bill, my pedal stops are the floor that the guitar sits on. Real simple that way, haven't had any issues with it yet. Right side fingers stop against end plate, left hand ones on tuning screws. I'll post another pic later, not at my cmputer right now.
Music is what feelings sound like!
Eldon
Eldon
Re: A few more pics of my new 8 string C6
Eldon,
It looks to me like you have installed the fingers the wrong way round.
The ball end of the string goes the other side of the finger, so that the string can then wrap around the full radius of the finger, with no sharp edges contributing to early string breakage.
It looks to me like you have installed the fingers the wrong way round.
The ball end of the string goes the other side of the finger, so that the string can then wrap around the full radius of the finger, with no sharp edges contributing to early string breakage.
Re: A few more pics of my new 8 string C6
I understand what you're saying Burt. The photos don't show it well but I have a changer at either end. The string goes around the top of the finger in both cases. I've been playing it for about 1/2 hour each day for a few monts now with no string breakage.
Music is what feelings sound like!
Eldon
Eldon
Re: A few more pics of my new 8 string C6
Eldon, it looks quite normal to me. Great work my friend!
http://benrom.com/
21 BenRom pedal steel guitars, a Nash 112 and a 1967 TOS Milling machine with many cutters making one hell of a mess on the floor.
21 BenRom pedal steel guitars, a Nash 112 and a 1967 TOS Milling machine with many cutters making one hell of a mess on the floor.
Re: A few more pics of my new 8 string C6
The first picture shows the correct way to route the string.
There are no sharp bends, unlike the second picture.
There are no sharp bends, unlike the second picture.
- Attachments
-
- String Route-crop.JPG (157.51 KiB) Viewed 5779 times
-
- String Route incorrect-crop.JPG (150.06 KiB) Viewed 5779 times
Re: A few more pics of my new 8 string C6
Richard, I see what you're saying now. Time will tell how it works for Eldon.
http://benrom.com/
21 BenRom pedal steel guitars, a Nash 112 and a 1967 TOS Milling machine with many cutters making one hell of a mess on the floor.
21 BenRom pedal steel guitars, a Nash 112 and a 1967 TOS Milling machine with many cutters making one hell of a mess on the floor.
Re: A few more pics of my new 8 string C6
Thanks for posting the pics Burt.
I see what you mean and agree with you. What may be a bit of a saving grace is that rather than drilling the hole for the string at right angles Drilled it at a bit of an angle. Then where it exits the finger I filed/dremmel tooled a channel so as to form a gentle bend. I'll have to look and see if I have room to change the fingers around. Try as I might I didn't see this one when I was building. Wouldn't take much to make a new set of fingers if need be.
As Bent says time will tell.
Thanks again Burt
I see what you mean and agree with you. What may be a bit of a saving grace is that rather than drilling the hole for the string at right angles Drilled it at a bit of an angle. Then where it exits the finger I filed/dremmel tooled a channel so as to form a gentle bend. I'll have to look and see if I have room to change the fingers around. Try as I might I didn't see this one when I was building. Wouldn't take much to make a new set of fingers if need be.
As Bent says time will tell.
Thanks again Burt
Music is what feelings sound like!
Eldon
Eldon