Here's 2 short video clips i've made today of my #3 Comeau PSG, it was recorded direct with a small camera, the guitar sounds much better than in the videos,but it gives you an idea of the sound.
http://www.youtube.com/user/Jennysue29? ... Y-vnQySt0M
http://www.youtube.com/watch?v=XuAwFCMW-M4
thanks for listening.
Pat C
#3 Comeau S10 4x5 (sound samples) " Update"
- Pat Comeau
- Posts: 418
- Joined: Thu Nov 05, 2009 1:49 pm
- Location: New-Brunswick Canada
- Contact:
#3 Comeau S10 4x5 (sound samples) " Update"
Last edited by Pat Comeau on Thu Dec 16, 2010 6:04 pm, edited 1 time in total.
Click the links to listen to my Comeau's pedal steel guitars
http://www.youtube.com/watch?v=hIYiaomZx3Q
http://www.youtube.com/watch?v=t7U3HwxAldw
http://www.youtube.com/watch?v=P2GhZTN_yXI
http://www.youtube.com/watch?v=TvDTw2zNriI
http://www.youtube.com/watch?v=hIYiaomZx3Q
http://www.youtube.com/watch?v=t7U3HwxAldw
http://www.youtube.com/watch?v=P2GhZTN_yXI
http://www.youtube.com/watch?v=TvDTw2zNriI
Re: #3 Comeau S10 4x5 (sound samples)
Hi Pat , your steel sounds great buddy , looks great too . Russ
Re: #3 Comeau S10 4x5 (sound samples)
Pat I think that sounded great considering the recording media. Your steel shows promise, that's for sure.
NOW: I need you to tell me exactly how you recorded this. When I try, it turns into a distorted mess.
What type of camera? ( I have a Nikon Coolpix)
Where? (I record in my shop. Bounces off of the concrete floor etc)
Level on your amp?
Is amp pointed right at camera mic?
Distance of camera from amp?
NOW: I need you to tell me exactly how you recorded this. When I try, it turns into a distorted mess.
What type of camera? ( I have a Nikon Coolpix)
Where? (I record in my shop. Bounces off of the concrete floor etc)
Level on your amp?
Is amp pointed right at camera mic?
Distance of camera from amp?
http://benrom.com/
21 BenRom pedal steel guitars, a Nash 112 and a 1967 TOS Milling machine with many cutters making one hell of a mess on the floor.
21 BenRom pedal steel guitars, a Nash 112 and a 1967 TOS Milling machine with many cutters making one hell of a mess on the floor.
- Pat Comeau
- Posts: 418
- Joined: Thu Nov 05, 2009 1:49 pm
- Location: New-Brunswick Canada
- Contact:
Re: #3 Comeau S10 4x5 (sound samples)
Bent,
the camera was a Canon PowerShot A570IS, and i fine that this camera records a little to bright or trebly for my taste, you have to record not too loud or you'll get distortions or clipping, the camera was about 12 feet from the amp as you can see in the video pointing straight at the amp and my studio monitors, level of the amp was 1 1/2 pre-gain and 2 post gain Peavey Session 500and , and it was recorded in my studio, i could make a better recording if i were to go into my sound card in the computer and edit the sound afterwords like most do(David Hartly) cause i have a recording studio.
the camera was a Canon PowerShot A570IS, and i fine that this camera records a little to bright or trebly for my taste, you have to record not too loud or you'll get distortions or clipping, the camera was about 12 feet from the amp as you can see in the video pointing straight at the amp and my studio monitors, level of the amp was 1 1/2 pre-gain and 2 post gain Peavey Session 500and , and it was recorded in my studio, i could make a better recording if i were to go into my sound card in the computer and edit the sound afterwords like most do(David Hartly) cause i have a recording studio.
Click the links to listen to my Comeau's pedal steel guitars
http://www.youtube.com/watch?v=hIYiaomZx3Q
http://www.youtube.com/watch?v=t7U3HwxAldw
http://www.youtube.com/watch?v=P2GhZTN_yXI
http://www.youtube.com/watch?v=TvDTw2zNriI
http://www.youtube.com/watch?v=hIYiaomZx3Q
http://www.youtube.com/watch?v=t7U3HwxAldw
http://www.youtube.com/watch?v=P2GhZTN_yXI
http://www.youtube.com/watch?v=TvDTw2zNriI
Re: #3 Comeau S10 4x5 (sound samples)
I record into my computer now, and won't go back to camcorder recording.
Camcorders don't do justice to PSG's, the tone is always compromised.
Camcorders don't do justice to PSG's, the tone is always compromised.
- Pat Comeau
- Posts: 418
- Joined: Thu Nov 05, 2009 1:49 pm
- Location: New-Brunswick Canada
- Contact:
Re: #3 Comeau S10 4x5 (sound samples) " Update"
here's another version video i've recorded today, this one was recorded through my sound card which sound alot better than the camera microphone
http://www.youtube.com/watch?v=P2GhZTN_ ... er&list=UL
thanks
Pat C.
http://www.youtube.com/watch?v=P2GhZTN_ ... er&list=UL
thanks
Pat C.
Click the links to listen to my Comeau's pedal steel guitars
http://www.youtube.com/watch?v=hIYiaomZx3Q
http://www.youtube.com/watch?v=t7U3HwxAldw
http://www.youtube.com/watch?v=P2GhZTN_yXI
http://www.youtube.com/watch?v=TvDTw2zNriI
http://www.youtube.com/watch?v=hIYiaomZx3Q
http://www.youtube.com/watch?v=t7U3HwxAldw
http://www.youtube.com/watch?v=P2GhZTN_yXI
http://www.youtube.com/watch?v=TvDTw2zNriI
Re: #3 Comeau S10 4x5 (sound samples) " Update"
Pat, the Comeau looks and sounds like a million bucks!! My hat comes off to you for a job well done!
You've got it man
Now of course you just have to keep going. What will be next?
I am just a tad envious.
But wait! A little birdie told me that the mill might be running by tomorrow night. Ya mon!
You've got it man
Now of course you just have to keep going. What will be next?
I am just a tad envious.
But wait! A little birdie told me that the mill might be running by tomorrow night. Ya mon!
http://benrom.com/
21 BenRom pedal steel guitars, a Nash 112 and a 1967 TOS Milling machine with many cutters making one hell of a mess on the floor.
21 BenRom pedal steel guitars, a Nash 112 and a 1967 TOS Milling machine with many cutters making one hell of a mess on the floor.
Re: #3 Comeau S10 4x5 (sound samples) " Update"
Awesome Pat,
You should be proud of The Comeau, recording sounds excellent too,
Stuart
You should be proud of The Comeau, recording sounds excellent too,
Stuart
-
- Posts: 189
- Joined: Tue Nov 24, 2009 11:52 am
Re: #3 Comeau S10 4x5 (sound samples) " Update"
Really Nice Pat!
Happy Holidays!
Happy Holidays!