Shobud springs question....?

If it has Pedals...
Post Reply
David Hartley
Posts: 2
Joined: Wed Sep 29, 2010 12:42 pm

Shobud springs question....?

Post by David Hartley »

Hello builders forum.
I have a question i know i should know the answer too but, if my shobud is upside down in its case, the lower springs you see, what exactly dod they do? If everything works as it should even if 1 or 2 go missing, should i be concerned?

Many thanks
Bob T.
Posts: 4
Joined: Fri Nov 13, 2009 4:17 pm
Location: San Angelo, Texas
Contact:

Re: Shobud springs question....?

Post by Bob T. »

David, Those are the raise helper springs. They're probably only on the strings that are raised. Some people say they're really not needed. Their purpose is to make the pedals easier when raising strings.
Bent
Posts: 1397
Joined: Mon Nov 02, 2009 3:10 pm
Location: Ontario Canada
Contact:

Re: Shobud springs question....?

Post by Bent »

David, the ones closest to the wood deck are the raise helper springs...correct.
I don't think they are needed. If you think your pedals move easily enough, then everything is ok.
http://benrom.com/
21 BenRom pedal steel guitars, a Nash 112 and a 1967 TOS Milling machine with many cutters making one hell of a mess on the floor.
Post Reply