Bent---- Changer Fingers/Levers
Bent---- Changer Fingers/Levers
Bent, out of curiosity when you make your changer fingers I'm assuming that you drill all your holes before you make the pullrod bend. Also when you bend do you heat the piece or do you just cold bend in a vice.
Music is what feelings sound like!
Eldon
Eldon
Re: Bent---- Changer Fingers/Levers
Eldon, That's right, I drill the holes first, then I put the hole part in the vise and tap it around to a 90 with the hammer
http://benrom.com/
21 BenRom pedal steel guitars, a Nash 112 and a 1967 TOS Milling machine with many cutters making one hell of a mess on the floor.
21 BenRom pedal steel guitars, a Nash 112 and a 1967 TOS Milling machine with many cutters making one hell of a mess on the floor.