Question about rails and cross shafts from Steven Black
Posted: Sat Aug 15, 2015 3:30 pm
I have my rails drilled out for the cross shafts, I am installing 4 cross shafts for 4 pedals, each cross shaft fits nicely and rotate very easily, but my question is when I put the rails and the cross shafts into the guitar do I need to put a pin cap on the ends of the shafts opposite side of rails where the rods has some part of the cross shaft stick through to keep them from coming out on one end or the other, or does the apron keep them in, the rods move back and forth in and out of the rails right now since the rail is not installed into the guitar. Steve B.