009 Amber; 010 Red2

If it has Pedals...
Post Reply
Bent
Posts: 1397
Joined: Mon Nov 02, 2009 3:10 pm
Location: Ontario Canada
Contact:

009 Amber; 010 Red2

Post by Bent »

Things are going too slow - must be my age...
Anyway got these 2 guitars in the works. Amber is going to Per Berner in Sweden and Red2 is going to my partner, George Leite just east of here.
Got them sanded, buffed and polished just today. Ten coats of lacquer this time. Wet sanding with 600, 800, 1000, 1200, 1500 wet/dry paper plus Maguiars Swirl remover and Maguiars Machine glaze.
Fincab.jpg
Fincab.jpg (73.12 KiB) Viewed 2085 times
Fincab1.jpg
Fincab1.jpg (74.74 KiB) Viewed 2085 times
http://benrom.com/
21 BenRom pedal steel guitars, a Nash 112 and a 1967 TOS Milling machine with many cutters making one hell of a mess on the floor.
Paul Lafountaine
Posts: 332
Joined: Sun Jan 23, 2011 5:06 am
Location: Northern Ontario

Re: 009 Amber; 010 Red2

Post by Paul Lafountaine »

I really like the red one Bent. Did you stain that with the leather stain?

Paul
User avatar
Bill Ford
Posts: 159
Joined: Mon Dec 14, 2009 8:16 am
Location: Aiken Co., S.C....U.S.A.

Re: 009 Amber; 010 Red2

Post by Bill Ford »

Bent, You know how I love a red guitar, if it were a 4+5, SD12, and I had the $$ it would be headed to SC. USA....Bill


BTW Bent, I've had a little excitement sense my last post. don't know if you saw this post..B
http://bb.steelguitarforum.com/viewtopic.php?t=268033
Bill Ford
Steeling For Jesus now
S12,CLR..S12MSA"The Universal" both Ext,E9..misc amps and toys.
Bent
Posts: 1397
Joined: Mon Nov 02, 2009 3:10 pm
Location: Ontario Canada
Contact:

Re: 009 Amber; 010 Red2

Post by Bent »

Hi Paul,
I use exclusively the dyes from StewMac now. It wasn't exactly the red I was looking for but closer than the leather dyes.
http://benrom.com/
21 BenRom pedal steel guitars, a Nash 112 and a 1967 TOS Milling machine with many cutters making one hell of a mess on the floor.
Bent
Posts: 1397
Joined: Mon Nov 02, 2009 3:10 pm
Location: Ontario Canada
Contact:

Re: 009 Amber; 010 Red2

Post by Bent »

Bill, I had no idea! I have not been on the forum much lately. I hope you get to be 100% after the surgery
http://benrom.com/
21 BenRom pedal steel guitars, a Nash 112 and a 1967 TOS Milling machine with many cutters making one hell of a mess on the floor.
Post Reply