Cross rails position question

If it has Pedals...
Post Reply
Blacksb21
Posts: 104
Joined: Sat Dec 24, 2011 5:07 pm

Cross rails position question

Post by Blacksb21 »

I am installing my cross rails into my pedal steel, my question is from the pedal changer hole how far in of the guitar to the first pedal rod what is the measurement, is this 2" inches or is it more? this is a single 10. thanks Steve B.
User avatar
Pat Comeau
Posts: 418
Joined: Thu Nov 05, 2009 1:49 pm
Location: New-Brunswick Canada
Contact:

Re: Cross rails position question

Post by Pat Comeau »

I don't get your question...but if your asking where the first pedal position should be?...it all depends where you want to put it, it can go more toward the middle or to the left toward the keyhead, spacing between pedals should be 2" 3/4 ...same distance as your bearing plate ,I measure from the middle of the pedal to the middle of the next one and so on, usely the first pedal from the left should be right underneath the 2nd and 9th string on your keyhead roughly ,

hope this help

Pat C
Post Reply