The second one, Oahu-style: finished
Re: The second one on the way!
Some more pics:
Xavier
Xavier
Re: The second one on the way!
Xavier, There is no doubt in my mind: You are an artist in the truest sense of the word. Everything - right from picking out the nicest wood to the final sanding and finish, your creations speak of high quality and beauty.
http://benrom.com/
21 BenRom pedal steel guitars, a Nash 112 and a 1967 TOS Milling machine with many cutters making one hell of a mess on the floor.
21 BenRom pedal steel guitars, a Nash 112 and a 1967 TOS Milling machine with many cutters making one hell of a mess on the floor.
Re: The second one on the way!
Thanks for the kind words Bent
-
- Posts: 332
- Joined: Sun Jan 23, 2011 5:06 am
- Location: Northern Ontario
Re: The second one on the way!
Hi Xavier,
Do I ever love the key head and inlay work. That is beautiful my friend. You should give us on the forum a detailed course on how you do that.
Paul
Do I ever love the key head and inlay work. That is beautiful my friend. You should give us on the forum a detailed course on how you do that.
Paul
Re: The second one on the way!
Thanks Paul
I can let you know how I did that if it can help (but remember I'm not a pro)
As I'm at work I cant show you a picture of me holding the dremel at work, I developped for this time (never too late to progress ) a new way to handle it, pictures tomorrow
I think it's important to have a good drawing of the inlay... I use a CAD software (for the New yorker), or a .jpg file of the inlay printed at right scale (double check+++)
Then you glue the paper on the wood using spray neoprene glue. This glue doesnt wet the paper as white glue does, and paper is easy to remove when the job is done
Then carefully cut the paper and the wood fibers a little OUTSIDE the drawing with an XACTO (I did it too near from drawing and it was painfull to enlarge the cavities with a scraper I grinded in a razor blade:
I use magnifying lenses to do that
Then rout with the dremel. If your XACTO job was good, you'll get clean cavities without pieces of paper coming inside the cavities.
Hold the dremel router base with TWO hands, facing you, and use a piece of wood as armrest (you can see it below). My previous inlay works were not done this way and this one is really better
AND, I built a foot switch for the Dremel, really helps too
Then enlarge the cavities as necessary, the best tools are sterwmac micro chisels and a small home-made scraper...
I'll be away from home for work the next 2 weeks, no lap steel building...
I can let you know how I did that if it can help (but remember I'm not a pro)
As I'm at work I cant show you a picture of me holding the dremel at work, I developped for this time (never too late to progress ) a new way to handle it, pictures tomorrow
I think it's important to have a good drawing of the inlay... I use a CAD software (for the New yorker), or a .jpg file of the inlay printed at right scale (double check+++)
Then you glue the paper on the wood using spray neoprene glue. This glue doesnt wet the paper as white glue does, and paper is easy to remove when the job is done
Then carefully cut the paper and the wood fibers a little OUTSIDE the drawing with an XACTO (I did it too near from drawing and it was painfull to enlarge the cavities with a scraper I grinded in a razor blade:
I use magnifying lenses to do that
Then rout with the dremel. If your XACTO job was good, you'll get clean cavities without pieces of paper coming inside the cavities.
Hold the dremel router base with TWO hands, facing you, and use a piece of wood as armrest (you can see it below). My previous inlay works were not done this way and this one is really better
AND, I built a foot switch for the Dremel, really helps too
Then enlarge the cavities as necessary, the best tools are sterwmac micro chisels and a small home-made scraper...
I'll be away from home for work the next 2 weeks, no lap steel building...
-
- Posts: 332
- Joined: Sun Jan 23, 2011 5:06 am
- Location: Northern Ontario
Re: The second one on the way!
Nice explanation of how you do the inlays. How deep do you cut into the wood for the inlays to be flush with the surface? from the pictures it looks like about 1/8", but I don't think that is right.
As for being jealous when you play the guitar, don't worry. My next build will look like your wife. LOL!
Keep up the good work my friend,
Paul
As for being jealous when you play the guitar, don't worry. My next build will look like your wife. LOL!
Keep up the good work my friend,
Paul
Re: The second one on the way!
Paul, the depth of the cavities depends on the inlay's thickness
I place the inlay on a flat surface, put the router base over it with the bit free to move, let it touch the flat surface near the inlay, lock the bit... That's it
It's better to glue the inlay's surface some 100th mms over the wood's surface, just beware the colored part of the inlay is still OK or you'll lose the color during the sanding process. You then can use black CA or epoxy (in ebony) to glue the inlay, and sand flush when set.
If you rout too deep, the inlay's surface will be lower than the wood. You'll have to use clear CA or epoxy to glue the inlay and fully cover it with the glue, that will have to fill the full cavity. That can be really nice in ebony, but dont forget to blacken the inlay's edges with a permanent marker, and beware the tiny bubles in the glue covering the inlay, they will be still visible on the finished product
In maple... I dont know I think I'll dye the wood black, as in light wood, a good inlay job is impossible mission
The foot switch :
That really makes the difference
Th way I hold the dremel BEFORE this time... inaccurate:
and this time:
Two hands control, and armrest...
I place the inlay on a flat surface, put the router base over it with the bit free to move, let it touch the flat surface near the inlay, lock the bit... That's it
It's better to glue the inlay's surface some 100th mms over the wood's surface, just beware the colored part of the inlay is still OK or you'll lose the color during the sanding process. You then can use black CA or epoxy (in ebony) to glue the inlay, and sand flush when set.
If you rout too deep, the inlay's surface will be lower than the wood. You'll have to use clear CA or epoxy to glue the inlay and fully cover it with the glue, that will have to fill the full cavity. That can be really nice in ebony, but dont forget to blacken the inlay's edges with a permanent marker, and beware the tiny bubles in the glue covering the inlay, they will be still visible on the finished product
In maple... I dont know I think I'll dye the wood black, as in light wood, a good inlay job is impossible mission
The foot switch :
That really makes the difference
Th way I hold the dremel BEFORE this time... inaccurate:
and this time:
Two hands control, and armrest...
Re: The second one on the way!
Hello boys,
Here's the washcoated headstock:
Now building the grain of the top:
Xavier
Here's the washcoated headstock:
Now building the grain of the top:
Xavier
Re: The second one on the way!
Hi guys,
Burst is done...
Burst is done...
Re: The second one on the way!
That is beautiful and extremely professional, your instructions on inlay work make it look easy, a sign of an excellent craftsman.
Ron Mc
Ron Mc