Anyone have any idea where I can get hold of a dimensioned drawing for a dual neck Stringmaster?
Regards, Allan.....
Dual 8 Stringmaster
Dual 8 Stringmaster
Only nuts eat squirrels.
Keep yer tools sharp! That way you can use more of your strength guiding them AWAY from your body rather than forcing the cut!!!
Keep yer tools sharp! That way you can use more of your strength guiding them AWAY from your body rather than forcing the cut!!!
- Don McGregor
- Posts: 49
- Joined: Sun Nov 01, 2009 9:18 pm
Re: Dual 8 Stringmaster
Alan,
I do not have a drawing, but I did get these measurements from the honorable Mr. John Tipka a while back. There's a chance he might also have a drawing, and this would probably come in handy, anyway.
Dimensions of a Fender Stringmaster - John Tipka - Reynoldsburg,OH
Post Posted 21 Mar 2009 7:08 am Dimensions of a Fender Stringmaster
24.5" scale length
Neck 1 = 1.5" thick
Neck 2 = 1.875" thick
Neck 3 = 2.25" thick
Neck 4 = 2.625" thick
Neck Length = 34.25"
Neck Width at Bridge End = 4.6875"
Neck Width at Tuner End = 4.3125"
Widths Assembled-Bridge End - 4 Necks = 18.625"
3 Necks = 14.000"
2 Necks = 8.6875"
1 Neck = 4.6875"
Tuner End - 4 Necks = 17.3125"
3 Necks = 13.000"
2 Necks = 8.6875"
1 Neck = 4.3125"
Rabbets-Front Neck .375"deep x 1" wide
Second,Third &
Fourth Necks .875"deep x 1" wide
Rear rabbet on each neck matches front rabbet on
the neck attached to its rear. Rear rabbet on outsidemost neck - .375" deep x 1.00" wide
Bridge located at 4" from bridge end of each neck
Pickups located at 5" and 6.5" from bridge end of each neck
Nut located scale length distance from bridge.
Volume and Tone controls or switches located 1.5" from bridge end of necks
Comparative measurements - 22.5" Stringmaster D-8
Length = 32.125"
Total Width = Bridge End = 9.3125"
Tuner End = 8.6875"
26" Stringmaster Total Length 36.25"
Pickups located at 0.875" and 2.8125" to left of bridge...
Cavities and channels bored or routered 1-125" deep for pickups, blend, tone and volume controls. A channel needed to accommodate ball end of strings. 1.125" diameter hole in
front edge of front neck for input jack.
I do not have a drawing, but I did get these measurements from the honorable Mr. John Tipka a while back. There's a chance he might also have a drawing, and this would probably come in handy, anyway.
Dimensions of a Fender Stringmaster - John Tipka - Reynoldsburg,OH
Post Posted 21 Mar 2009 7:08 am Dimensions of a Fender Stringmaster
24.5" scale length
Neck 1 = 1.5" thick
Neck 2 = 1.875" thick
Neck 3 = 2.25" thick
Neck 4 = 2.625" thick
Neck Length = 34.25"
Neck Width at Bridge End = 4.6875"
Neck Width at Tuner End = 4.3125"
Widths Assembled-Bridge End - 4 Necks = 18.625"
3 Necks = 14.000"
2 Necks = 8.6875"
1 Neck = 4.6875"
Tuner End - 4 Necks = 17.3125"
3 Necks = 13.000"
2 Necks = 8.6875"
1 Neck = 4.3125"
Rabbets-Front Neck .375"deep x 1" wide
Second,Third &
Fourth Necks .875"deep x 1" wide
Rear rabbet on each neck matches front rabbet on
the neck attached to its rear. Rear rabbet on outsidemost neck - .375" deep x 1.00" wide
Bridge located at 4" from bridge end of each neck
Pickups located at 5" and 6.5" from bridge end of each neck
Nut located scale length distance from bridge.
Volume and Tone controls or switches located 1.5" from bridge end of necks
Comparative measurements - 22.5" Stringmaster D-8
Length = 32.125"
Total Width = Bridge End = 9.3125"
Tuner End = 8.6875"
26" Stringmaster Total Length 36.25"
Pickups located at 0.875" and 2.8125" to left of bridge...
Cavities and channels bored or routered 1-125" deep for pickups, blend, tone and volume controls. A channel needed to accommodate ball end of strings. 1.125" diameter hole in
front edge of front neck for input jack.
Re: Dual 8 Stringmaster
Comprehensive! WOW, thanks Don...
Regards, Allan.....
Regards, Allan.....
Only nuts eat squirrels.
Keep yer tools sharp! That way you can use more of your strength guiding them AWAY from your body rather than forcing the cut!!!
Keep yer tools sharp! That way you can use more of your strength guiding them AWAY from your body rather than forcing the cut!!!
Re: Dual 8 Stringmaster
Don beat me to it with the numbers, but here's a straight-on photo that might be an aid (along with the dimensions) for making a drawing:
HTH.
HTH.
In theory, there is no difference between theory and practice. In practice, there is.
Re: Dual 8 Stringmaster
Excellent, that will probably answer all my needs along with the previous post. Thank you...michaelm wrote:Don beat me to it with the numbers, but here's a straight-on photo that might be an aid (along with the dimensions) for making a drawing...
Only nuts eat squirrels.
Keep yer tools sharp! That way you can use more of your strength guiding them AWAY from your body rather than forcing the cut!!!
Keep yer tools sharp! That way you can use more of your strength guiding them AWAY from your body rather than forcing the cut!!!
-
- Posts: 22
- Joined: Sat Oct 30, 2010 12:39 pm
Re: Dual 8 Stringmaster
Hi Allan,
As I am intending to have my own (26" scalelength) Double 8 Stringmaster built by Fern, a company here in The Netherlands, I was wondering if you ever succeeded in building one your own. I am desperately searching for good drawings which, in combination with some pics to find on the internet, might help us to get a clear insight in the features of such an instrument. Hope that you or some of the other guys here on the forum might be able to help me out.
Thanks a lot,
Harry Sibum,
BOSKOOP, The Netherlands
As I am intending to have my own (26" scalelength) Double 8 Stringmaster built by Fern, a company here in The Netherlands, I was wondering if you ever succeeded in building one your own. I am desperately searching for good drawings which, in combination with some pics to find on the internet, might help us to get a clear insight in the features of such an instrument. Hope that you or some of the other guys here on the forum might be able to help me out.
Thanks a lot,
Harry Sibum,
BOSKOOP, The Netherlands
destroying guitars since 1960, restoring guitars since 1995
-
- Posts: 1
- Joined: Mon Jul 16, 2012 10:41 pm
Re: Dual 8 Stringmaster
Allan,
can you send me a fretboard image for a 24.5 scale stringmaster?
thanks
Bob
roberto.alaniz@comcast.net
can you send me a fretboard image for a 24.5 scale stringmaster?
thanks
Bob
roberto.alaniz@comcast.net