I lost the web page where I found this (Google DIY Reamer). They had 3 diferent types. I used a short piece of my 1/2 inch shaft cut out as per diagram to ream out my finger bushing (brass).
Cut/grind to 1/2 way point on rod and sharpen cutting edgr with a stone. 45 degree chamfer on end makes it semi- self centering.
Low budget but it works!
DIY Reamer
DIY Reamer
- Attachments
-
- DIY Reamer.jpg (30.54 KiB) Viewed 8045 times
Music is what feelings sound like!
Eldon
Eldon
Re: DIY Reamer
Thats a good idea, thanks for the tip.
dave
dave