DIY Reamer

Tools, shop setup, jigs...
Post Reply
Eldon
Posts: 286
Joined: Mon Nov 02, 2009 6:39 pm
Location: LeeSiding, Ontario

DIY Reamer

Post by Eldon »

I lost the web page where I found this (Google DIY Reamer). They had 3 diferent types. I used a short piece of my 1/2 inch shaft cut out as per diagram to ream out my finger bushing (brass).

Cut/grind to 1/2 way point on rod and sharpen cutting edgr with a stone. 45 degree chamfer on end makes it semi- self centering.

Low budget but it works!
Attachments
DIY Reamer.jpg
DIY Reamer.jpg (30.54 KiB) Viewed 7737 times
Music is what feelings sound like!

Eldon
Dave L
Posts: 30
Joined: Mon Apr 12, 2010 6:03 pm
Location: Oconomowoc, WI

Re: DIY Reamer

Post by Dave L »

Thats a good idea, thanks for the tip.
dave
Post Reply