Bill Lawrence pick ups

Pickups, Diy Electronics, Stompboxes, Guitar wiring...
Post Reply
User avatar
sheffield steel
Posts: 188
Joined: Mon May 10, 2010 9:24 am
Location: Southampton, UK

Bill Lawrence pick ups

Post by sheffield steel »

Hi guys, How do I wire up my 2 Bill Lawrence 705 pick ups for E9th & C6th with a neck isolating switch in-between? Any help diagrams would be appreciated because there are 4/5 wires on each pick up. Kind regards, Dave. :?:
Sheffield D10 9+8, Bradshaw WEBB 614-E, Sheffield stainless steel tone bars, Hilton electronic volume pedal, Pro-Fex 2, BOSS DD3
na4it
Posts: 101
Joined: Wed Jan 02, 2013 12:26 pm

Re: Bill Lawrence pick ups

Post by na4it »

Scott Duckworth
E6 Rogue lap steel, D6 Regal RD-30MS squareneck reso-guitar,
Li'l Izzy, Zoom MS-50G Effects Pedal into a Berhinger mixer and Harbinger V2112 speaker(s).

Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
User avatar
sheffield steel
Posts: 188
Joined: Mon May 10, 2010 9:24 am
Location: Southampton, UK

Re: Bill Lawrence pick ups

Post by sheffield steel »

Thanks Scott. Dave. :D
Sheffield D10 9+8, Bradshaw WEBB 614-E, Sheffield stainless steel tone bars, Hilton electronic volume pedal, Pro-Fex 2, BOSS DD3
Post Reply