Bill Lawrence pick ups
- sheffield steel
- Posts: 188
- Joined: Mon May 10, 2010 9:24 am
- Location: Southampton, UK
Bill Lawrence pick ups
Hi guys, How do I wire up my 2 Bill Lawrence 705 pick ups for E9th & C6th with a neck isolating switch in-between? Any help diagrams would be appreciated because there are 4/5 wires on each pick up. Kind regards, Dave.
Sheffield D10 9+8, Bradshaw WEBB 614-E, Sheffield stainless steel tone bars, Hilton electronic volume pedal, Pro-Fex 2, BOSS DD3
Re: Bill Lawrence pick ups
Scott Duckworth
E6 Rogue lap steel, D6 Regal RD-30MS squareneck reso-guitar,
Li'l Izzy, Zoom MS-50G Effects Pedal into a Berhinger mixer and Harbinger V2112 speaker(s).
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
E6 Rogue lap steel, D6 Regal RD-30MS squareneck reso-guitar,
Li'l Izzy, Zoom MS-50G Effects Pedal into a Berhinger mixer and Harbinger V2112 speaker(s).
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
- sheffield steel
- Posts: 188
- Joined: Mon May 10, 2010 9:24 am
- Location: Southampton, UK
Re: Bill Lawrence pick ups
Thanks Scott. Dave.
Sheffield D10 9+8, Bradshaw WEBB 614-E, Sheffield stainless steel tone bars, Hilton electronic volume pedal, Pro-Fex 2, BOSS DD3