Hey Jason, thanks for the response! Like I mentioned it's one piece of wood, so there's no glue there at all.Jason Lynch wrote:Are you using a particular type of glue? Strange that it’s only in the joint between pieces of wood?
Search found 6 matches
- Fri Dec 01, 2017 12:46 pm
- Forum: Finishing Techniques
- Topic: Strange Nitro Reaction
- Replies: 2
- Views: 7528
Re: Strange Nitro Reaction
- Fri Dec 01, 2017 12:04 pm
- Forum: Finishing Techniques
- Topic: Strange Nitro Reaction
- Replies: 2
- Views: 7528
Strange Nitro Reaction
Has anyone ever seen a reaction like this? I first noticed it in my primer coat. I tried spraying much thinner, misting it, much thicker, and in a range of different temperatures and humidities. I eventually got it good enough and figured it could be a product of the primer I used being fairly thick...
- Mon Jan 30, 2017 8:14 am
- Forum: Lap Steel
- Topic: Collecting Information on String Spacing
- Replies: 4
- Views: 1513
Re: Collecting Information on String Spacing
Pedal steel pickups are usually about 2" center to center from the bridge Great, thank you! It seems like lap steel pickups are often butted almost right up against the bridge, but while I'll like the twang a lot I think this lap steel will be used in the background of recordings at my studio a lot...
- Thu Jan 26, 2017 3:35 pm
- Forum: Lap Steel
- Topic: Collecting Information on String Spacing
- Replies: 4
- Views: 1513
Re: Collecting Information on String Spacing
You'll get different opinions on this. So, this is just my opinion: I really like parallel spacing. I see no advantage in non-parallel spacing. Bar slants are not esoteric. I do them all the time. Lots of steel players do them. I've converted three of my pedal steels to parallel spacing because I d...
- Wed Jan 18, 2017 9:42 am
- Forum: Lap Steel
- Topic: Collecting Information on String Spacing
- Replies: 4
- Views: 1513
Collecting Information on String Spacing
I'm getting started on a lap steel build, and I've been looking all over for information on string spacing, including a lot of searching here but I'm having trouble making heads or tails of the various findings. It seems like 3/8" is standard, but I've seen people say this typically refers to the sp...
- Thu Dec 01, 2016 11:34 pm
- Forum: Lap Steel
- Topic: Aluminum angle nut and bridge
- Replies: 1
- Views: 1388
Aluminum angle nut and bridge
I've been perusing this forum for a bit - great info all around! Really appreciate having a place for this kind of discussion. I see a lot of people mentioning and posting photos of nuts made of aluminum angle, and also aluminum angle bridges. However I've seen almost no photos of lap steels with bo...